How to Update Galaxy S3 Sprint SPH L710 with Android 4 1 2 VPBMD4 Jelly Bean Official Firmware

The Sprint subscribers of Samsung Galaxy 3 with model number SPH-L710 recently received its first Android 4.1.2 Jelly Bean firmware update with base firmware L710VPBMD4.

Firmware details
PDA: L710VPBMD4
CSC: L710SPRBMD4
MODEM: L710VPBMD4
Version: Android 4.1.2
Built date: Apr 15, 2013
Regions: U.S. (Sprint)

The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES. However, those who missed the OTA update notification or unable to access the update over Samsung KIES can download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Driver for Samsung Galaxy S3 (Sprint) on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 per cent.
5. The Android 4.1.2 VPBMD4 Jelly Bean firmware is compatible only with Galaxy S3 (Sprint) SPH-L710. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 (Sprint) by navigating to Settings >> About Phone.

File Required
1. Android 4.1.2 VPBMD4 Jelly Bean Firmware for Galaxy S3 (Sprint) SPH-L710
2. Odin 3.07

Steps to Update Galaxy S3 (Sprint) SPH-L710 with Android 4.1.2 VPBMD4 Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S3 (Sprint) to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Choose the following files in Odin from extracted L710VPBMD4 firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 (Sprint) SPH-L710 should be now updated with official Android 4.1.2 VPBMD4 Jelly Bean firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S3 (Sprint) SPH-L710 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 VPBMD4 Jelly Bean firmware.

Read More..

YouTube And TalkBack Entertainment On The Go

Video: TalkBack And YouTube

1 Video: TalkBack And YouTube

Device: Motorola Droid on Verizon

This video demonstrates searching for and playing YouTube videos with TalkBack providing spoken feedback at each step in the interaction.

1. Launch YouTube from the Marvin Application launcher.
2. The trackball can be used here to move through the list of videos.
3. Pressing down on the trackball launches the selected video.
4. Press menu key to enter the YouTube application menu.
5. Click on Search with the trackball.
6. Type a query into the edit field. TalkBack speaks as you type.
7. Press Enter to perform the search.
8. Scroll the results list with the track-ball.
9. Click a desired result to start playing the video.

Author: T.V Raman <raman@google.com>

Read More..

How to Update Galaxy Ace 2 I8160 with Android 4 1 2 XXMK2 Jelly Bean Official Firmware

Samsung Galaxy Ace 2 (GT-I8160) users in UK has already received the Android 4.1.2 Jelly Bean update with base firmware XXMK2. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I8160XXMK2
CSC: I8160BTUMK2
MODEM: I8160XXMK2
Version: Android 4.1.2
Build date: Nov 15, 2013
Regions: United Kingdom

Samsung Galaxy Ace 2 I8160 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside UK can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Ace 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 XXMK2 Jelly Bean firmware is compatible only with the Samsung Galaxy Ace 2 (GT-I8160). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 2 by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 XXMK2 Jelly Bean Firmware (Mirror Link 1, Link 2) for Galaxy Ace 2 I8160
2. Odin 3.07

Steps to Update Galaxy Ace 2 I8160 with Android 4.1.2 XXMK2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted S7275RXXUAMK1 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Ace 2 I8160 should be now updated with official Android 4.1.2 XXMK2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Ace 2 I8160 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Ace 2 I8160 running on Android 4.1.2 XXMK2 Jelly Bean firmware.

Read More..

How to Update Galaxy Note 8 0 LTE N5120 with Android 4 2 2 XXCMH1 Jelly Bean Official Firmware

Today, Samsung released another Android 4.2.2 Jelly Bean update for the LTE variant of Galaxy Note 8.0 (GT-N5120). The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N5120XXCMH1
CSC: N5120BTUCMH1
MODEM: N5120XXCMG7
Version: Android 4.2.2
Build date: Aug 01, 2013
Regions: United Kingdom

Samsung Galaxy Note 8.0 (LTE) N5120 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 8.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 8.0 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXCMH1 Jelly Bean firmware is compatible only with Samsung Galaxy Note 8.0 (LTE) N5120. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

File Required
1. Android 4.2.2 XXCMH1 Jelly Bean Firmware (Mirror Link) for Galaxy Note 8.0 (LTE) N5120
2. Odin 3.07

Steps to Update Galaxy Note 8.0 (LTE) N5120 with Android 4.2.2 XXCMH1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 8.0.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Choose the following files in Odin from extracted N5120XXCMH1 firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note 8.0 (LTE) N5120 should be now updated with official Android 4.2.2 XXCMH1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 8.0 (LTE) N5120 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Note 8.0 (LTE) N5120 running on Android 4.2.2 XXCMH1 Jelly Bean firmware.

Read More..